Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500T Chainsaw
- Table of Contents
- Introduction
- Safety
- For safe use of your product
- International Symbols
- Location in which the safety decal is attached
- Handling the Product
- Chainsaw Safety Warnings
- Causes and Operator Prevention of Kickback
- Kickback Safety Precautions
- General Precautions
- Precautions for Use
- Users of the product
- Environment of Use and Operation
- Vibration and Cold
- Repetitive stress injuries
- Transport of the product
- Starting the unit
- Once the unit has started, check for abnormal vibrations and sounds.
- Disconnect the battery:
- Do not touch high temperature or high voltage components while the product is running.
- Turn off the unit when checking or maintaining the product.
- Turn off the unit immediately if anything goes wrong.
- A ten meter radius is a danger zone.
- One-handed use is intended for trained tree service professionals only.
- Using the product.
- Make sure that the saw chain is stopped before putting the unit on the ground
- Protective Gear
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
- Warranty
- Notes
DESCRIPTION DCS-2500T
26 X7508220201
© 4/22 ECHO Incorporated
DESCRIPTION
1. Front hand guard
2. Front handle (for the left hand)
3. Rear handle (for the right hand)
4. Battery
5. Sprocket cover
6. Chain tension adjuster
7. Chain catcher
8. Guide bar
9. Saw chain
10. Oil tank
11. Oil tank cap
12. Type and serial number
13. Cover
14. Hanging hook
15. Lifting hook
16. Oil adjusting screw