Product Manual

23
CSG-680
Storage After Use
z Inspect and adjust every part of the cut-off saw.
- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
z Remove cutting wheel.
z Drain fuel tank, pull starter slowly a few times to
drain fuel from carburettor.
z Pour a small amount of clean motor oil into spark
plug hole, pull starter and crank the engine until
piston reaches: Top Dead Center.
z Store in a dry area, free from dust.
WARNING
Do not store in enclosure where fuel fumes
may accumlate or reach an open flame or
spark.
NOTE
For future reference, you should keep this
operator’s manual.
Disposal procedure
z Dispose of waste oil in accordance with local
regulations.
z Major plastic parts making up the product have
codes showing their materials.
The codes refer to the following materials;
dispose of those plastic parts in accordance with
local regulations.
z Please contact your ECHO dealer in case you
do not know how you should dispose of waste oil
/ plastic parts.
Mark Material
>PA6-GF< Nylon 6 - Glass fiber
>PP-GF< Polypropylene - Glass fiber
>PE-HD< Polyethylene