Use and Care Manual
Table Of Contents
- Operator’s Manual CS-7310P Chainsaw
- Table of Contents
- Introduction
- Servicing Information
- Packing List
- Safety
- Emission Control
- (Exhaust & Evaporative)
- Description
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
MAINTENANCE CS-7310P
54 X7503340002
© 11/21 ECHO Incorporated
• Properly filed cutters are
shown in illustration.
• When setting of the chain is
finished, soak it in oil and
wash away filings completely
before using.
• When chain has been filed on
the bar, supply sufficient oil to
it, move the chain slowly to
wash away the filings before
using again.
• If the chainsaw is operated
with filings clogged in the
groove, the saw chain and the
guide bar will be damaged
prematurely.
• If the saw chain becomes
soiled with resin, for instance,
clean it with kerosene and
soak in it oil.
To sharpen other chains, follow chain manufacturer’s instructions.
60°
Side plate angle
25°
Top plate
filing angle
0.64 mm (0.025 in.)
Parallel depth gauge