Use and Care Manual
Table Of Contents
- Operator’s Manual CS-7310P Chainsaw
- Table of Contents
- Introduction
- Servicing Information
- Packing List
- Safety
- Emission Control
- (Exhaust & Evaporative)
- Description
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
CS-7310P OPERATION
X7503340002 31
© 11/21 ECHO Incorporated
6. Pull choke control knob (C) all
the way out (closed [ ] choke
position).
◆ After choke control knob is pulled and then knob is
returned to original position, throttle remains slightly open
(fast idle latch condition).
◆ The chain will attempt to move when engine is started with
fast idle throttle latch engaged.
◆ Do not start engine before chain brake is locked.
7. Securely hold the chainsaw and
pull starter handle until first
starting sound.
8. Push choke control knob (C) all
the way in (open choke
position).
9. Pull starter handle to start the
engine.
Note: Do not pull starter rope
out to the maximum
possible position.
Note: Do not allow recoil handle
to snap back against the
casing.
C
C