Use and Care Manual

MAINTENANCE CS-7310P
50 X7503340000
© 10/20 ECHO Incorporated
• To keep correct position and
correct angle, use a file holder.
• Hold the file horizontally.
• Place the depth gauge tool firmly
on guide bar so that depth gauge
protrudes. Then file top of depth
gauge with the flat file until flat with
top of the depth gauge tool.
• One fifth of the file diameter
remains above cutter edge.
• Be sure to round off the front edge
of the depth gauge.
• Properly filed cutters are shown in
illustration.
• When setting of the chain is
finished, soak it in oil and
wash away filings completely
before using.
10
o
1/5”
Depth gauge tool
55°
Side plate angle
25°
Top plate
filing angle