Use and Care Manual

MAINTENANCE CS-7310P
48 X7503340000
© 10/20 ECHO Incorporated
Exhaust Port Cleaning
Level 2.
1. Remove air cleaner cover and
remove spark plug lead.
2. Place piston at top dead center.
3. Remove muffler. Check parts for
wear or damage, and replace if
necessary.
Never use a metal tool to scrape carbon from the exhaust port. Do
not scratch the cylinder or piston when cleaning the exhaust port. Do
not allow carbon particles to enter the cylinder.
4. Use a wood or plastic scraping tool to clean deposits from cylinder
exhaust port.
5. Install muffler. Tighten muffler mounting bolts (or nuts) to 8-11 N•m
(70-95 in•lbf).
6. Install engine cover and attach spark plug lead.
7. Replace air cleaner cover.
8. Start engine, and allow unit to warm up at idle for several minutes.
9. Stop engine, and re-tighten mounting bolts (or nuts) to 8-11 N•m
(70-95 in•lbf).
10. Install guide bar and chain. Adjust chain tension.
11. Start engine and check for exhaust leaks between muffler and cylinder
head. Stop engine if leak is found and correct problem before operating
chain saw.
Parts Required: As needed: Muffler gasket