Use and Care Manual
Table Of Contents
- Operator’s Manual CS-7310P Chain Saw
- Table of Contents
- Introduction
- Servicing Information
- Packing List
- Safety
- Emission Control (Exhaust & Evaporative)
- Description
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
CS-7310P OPERATION
X7503340000 39
© 10/20 ECHO Incorporated
Only use saw chain designated as, “LOW-KICKBACK,” that
meets ANSI B175.1 or CSA Z62.1, .3 Standard when tested on
the representative sample of chain saws below 3.8 C.I.D., and
Echo guide bar specified.
Chain and guide bar gauge size must be identical. Use Bar/Chain
combinations shown in table above.
Note: LOW KICKBACK SAW CHAIN meets the kickback
performance requirements of ANSI B175.1 or CSA Z62.1, .3
(safety requirements for gasoline-powered chain saws).
Guide Bar
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to have equivalent kickback
energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch
and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket
nose bar.
711 (28) 28H8PS3892 3/8” 73LPX92CQ 92
813(32) 32H8PS3805 3/8” 73LPX105CQ 105
Guide Bar Saw Chain