Use and Care Manual
Table Of Contents
- Operator’s Manual CS-7310P Chain Saw
- Table of Contents
- Introduction
- Servicing Information
- Packing List
- Safety
- Emission Control (Exhaust & Evaporative)
- Description
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
CS-7310P OPERATION
X7503340000 31
© 10/20 ECHO Incorporated
◆ Use the fast idle throttle latch only in starting.
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain
brake before starting.
2. Confirm there is fuel and chain
oil in the tanks.
3. Move stop switch (A) UP to
“RUN” position.
4. Press the decompression
device (B).
5. Securely hold the chain saw as
shown and pull starter handle.
6. Choke may be used if
necessary, but after first starting
sound, squeeze throttle trigger
to release choke and return
engine to idle.
A
B