Use and Care Manual

Table Of Contents

OPERATION CS-7310P

30 X7503340000

6. Pull choke control knob (C) all

the way out (closed [ ]

choke position).

◆ After choke control knob is pulled and then knob is

returned to original position, throttle remains slightly open

(fast idle latch condition).

◆ The chain will attempt to move when engine is started with

fast idle throttle latch engaged.

◆ Do not start engine before chain brake is locked.

7. Securely hold the chain saw

and pull starter handle until first

starting sound.

8. Push choke control knob (C) all

the way in (open choke

position).

9. Pull starter handle to start the

engine.

Note: Do not pull starter rope

out to the maximum

possible position.

Note: Do not allow recoil handle to snap back against the casing.

Note: If engine does not start after 5 pulls, repeat instructions.

◆ After starting the engine, immediately squeeze and then

release throttle trigger to release fast idle throttle latch,

otherwise severe brake damage can occur.

◆ Never use fast idle throttle latch for cutting.