Use and Care Manual

Table Of Contents

CS-7310P DESCRIPTION

X7503340000 23

5. Mount guide bar on studs (E) and

slide toward clutch drum (F) to

make saw chain installation

easier. Ensure chain tension

adjuster pin (H) fits into the guide

bar adjuster hole..

6. Install saw chain around sprocket

and guide bar as shown, with

cutters on top of guide bar facing

forward.

7. Install sprocket guard over guide

bar studs. Tighten sprocket

guard nuts finger tight.

8. Adjust saw chain tension, as

instructed in “Adjusting Chain

Tension”.

9. Install spark plug lead and air

cleaner cover.

Adjusting Chain Tension

Always loosen sprocket guard nuts before turning the chain tension

adjuster, otherwise the sprocket guard and tensioner will be

damaged.

1. Remove air cleaner cover and disconnect spark plug lead.

2. Loosen sprocket guard nuts.