Use and Care Manual

4
CS-620P
SYMBOL FORM
Symbol form / shape Symbol description / application Symbol form / shape Symbol description / application
WARNING!!
Read and follow all safety
precaution in the Operator's
Manual. Failure to follow
instructions could result in
serious personal injury.
Oil and gasoline mixture
Wear eyes, ears and head
protection
Chain oil fill
Tip contact may cause the
guide bar to move suddenly
upward and backward, which
may cause serious injury
Chain oiler adjustment
Contact of the guide bar tip
with any object should be
avoided
Decompression device
Both of the operator’s hands
must be used to operate the
chain saw
L
Carburetor adjustment
- Low speed mixture
Chain brake operation
H
Carburetor adjustment
- High speed mixture
STOP
Emergency stop
T
Carburetor adjustment
- Idle speed
Choke control “Cold Start”
position (choke closed)
WARNING
The safety alert symbol accompanied by
the word “WARNING” calls attention to an
act or condition which CAN lead to serious
personal injury or death if not avoided.
CAUTION
The safety alert symbol accompanied by
the word “CAUTION” calls attention to an
act or condition which may lead to minor or
moderate personal injury if not avoided.
NOTICE
This enclosed message provides tips for use,
care and maintenance of the unit.
IMPORTANT
The enclosed message provides information
necessary for the protection of the unit.
DANGER
The safety alert symbol accompanied by
the word “DANGER” calls attention to an
act or condition which WILL lead to serious
personal injury or death if not avoided.
SYMBOLS AND SIGNS
CIRCLE AND SLASH SYMBOL
This symbol means the specific action
shown is prohibited. Ignoring these
prohibitions can result in serious or
fatal injury.