Use and Care Manual

CS-620P

End of the guide bar may be placed at the

height of about 40 cm (16 in.).

40 cm

(16 in.)

AUTOMATIC CHAIN BRAKE

Kickback produced from the tip of the guide bar will

trip the automatic chain brake. To make sure that

the automatic chain brake operates properly, follow

these steps:

1. Stop the engine.

2. Hold the saw with the guide bar approximately

40 cm (16 in.) above a wooden surface. Right

hand should hold the rear handle, and left hand

should hold the front handle.

3. Release the front handle and drop the end of the

guide bar against the wooden surface.

4. The impact should lock the chain brake.

IMPORTANT

When checking the operation of the automatic

chain brake, use a soft surface substance like

wood to provide the impact so the chain is not

damaged.

WINTER OPERATION

Use the air shutter to prevent carburetor trouble in

winter.

• Remove air cleaner cover.

Pull the air shutter to cold position.

NOTICE

For operation at normal temperature, return the

air shutter to its original place. (5°C, 41°F)

It causes over heating of the engine.

Rear handle should be gripped lightly with the

right hand.

Air cleaner cover

Air shutter

Warm weather position

(push; closed)

Cold weather position

(pull; opend)