Use and Care Manual

OPERATION CS-4910
32 X7503314201
© 05/22 ECHO Incorporated
11. When engine starts, immediately
squeeze and release throttle
trigger (F) to disenge throttle
latch (G) and returning engine to
idle. Pull front hand guard (A)
towards the operator
immediately (chain brake
unlocked position).
Note: Do not increase engine
speed while chain brake
(A) is locked. Severe brake
damage will result.
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when
starting the chainsaw.
1. Move chain brake lever (A) fully
FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain
oil in the tanks.
3. Move STOP switch (B) to UP
position.
4. Press the decompression device
(D).
F
G
A
B
C
D