Use and Care Manual
Table Of Contents
- Operator’s Manual CS-4910 Chainsaw
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Emission Control
- (Exhaust & Evaporative)
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
CS-4910 ASSEMBLY
X7503314201 25
© 05/22 ECHO Incorporated
3. Hold the bar nose up, and turn
the adjuster toward (+) until
chain contacts underside of the
bar.
4. Tighten nuts with the bar nose
held up.
5. Pull the chain around the bar by
hand. Loosen the adjustment if
you feel tight spots.
Tighten guide bar nuts to 20-23 N•m (175-200 lbf•in). DO NOT over-
tighten nuts. Damage to saw may result.
6. Assemble components in reverse order.
7. Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.