Owner's Manual

29
CS-400F
SETTING THE SAw CHAIN
Sharpen lower edge
Drive link
Tie strap
Right hand cutter
Preset tie strap
Left hand cutter
Guard link
Top plate
Side plate
Depth guage
Important points for proper maintenance of saw chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly aligned.
• Note that blunt or irregular cutters will result in poor
cutting performance, increased vibration of chains and
premature breakage of the saw chain.
• Drive link serves to remove sawdust from the groove
of the guide bar. Keep the lower edge of the drive link
sharp where indicated.
SETTING SAW CHAIN
• For setting saw chain, round le (4.0 mm dia.
5/32 in.) and at le are used.
• To keep correct position and correct angle, use the le
holder (Sure Sharp
®
).
Hold the le horizontally
30°
Keep this angle
Push le as shown
90°