Owner's Manual

10
CS-400F
DECALS
Locate these safety decals on your unit. Make sure
the decal is legible and that you understand and
follow the instructions on it. If a decal cannot be
read, a new one can be ordered from your ECHO
dealer.
REPLACEMENT BAR AND CHAIN
GUIDE BAR* CHAIN*
PART NO. TYPE LINKS
16” 16A0CD3757 OREGON 91PX 57
18” 18A0CD3762 OREGON 91PX 62
*Or equivalent
Note: There may be other replace-
ment components for achieving
kickback protection. For details,
please refer to the chain and bar
combination sheet shown in the
instruction manual.
WARNING!! Read and follow all
safety precaution in the instruction
manual. Failure to follow
instructions could result in serious
personal injury.
CS-400F
EMISSION DATA
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying
the engine emissions output meets applicable emissions regulations, provided that approved mainte-
nance procedures are followed as listed in the Maintenance Section of this manual.
EMISSION CONTROL (ExHAUST & EvAPORATIvE)
EPA 2010 and Later and/or C.A.R.B. TIER III
An Emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label varies
by engine FAMILY).
The emission control system for the engine is EM (en-
gine modication) and, if the second to last character of
the Engine Family on the Emission Control Information
label (sample below) is “C”, “K”, or “T”, the emission
control system is EM and TWC (3-way catalyst). The fuel
tank/fuel line emission control system is EVAP (evapo-
rative emissions). Evaporative emissions for California
models are only applicable to fuel tanks.
X5053230900