Instructions / Assembly

X7503255900 47

CS-400 STORAGE

Fuel vapors are extremely flammable and may cause fire and/or

explosion. Never test for ignition spark by grounding spark plug

near cylinder plug hole, otherwise serious personal injury may

result.

STORAGE

Storage After Use

• Inspect and adjust every part of the chain saw.

• Completely clean every part and repair if necessary.

• Apply thin coating of oil on metal parts to prevent rust.

• Remove chain and guide bar.

• Drain fuel tank completely. Press purge bulb 6-7 times to remove remaining

fuel from carburetor then drain the tank again. Close choke, start and run the

engine until it stops due to lack of fuel.

• Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of

fresh, clean, two-stroke engine oil into the cylinder through the spark plug

hole.

• Store in a dry area, free from dust.

Do not store in an enclosure where fuel fumes may accumulate or

reach an open flame or spark.

Do not lend or rent your chain saw without the Instruction manual

and Safety manual.

Note:

• For future reference, you should keep this Instruction manual and the

Safety manual.

• If this Instruction manual or the Safety manual has become illegible or is

lost, please contact your ECHO dealer, or go to www.echo-usa.com.