Instructions / Assembly

X7503255900 45
© 1/2017 ECHO Inc.
CS-400 MAINTENANCE
• Be sure to round off the front edge of
the depth gauge.
• Properly filed cutters are shown in
illustration.
• When setting of the chain is
finished, soak it in oil and wash
away filings completely before
using.
• When chain has been filed on the
bar, supply sufficient oil to it, move the
chain slowly to wash away the filings
before using again.
• If the chain saw is operated with filings
clogged in the groove, the saw chain
and the guide bar will be damaged
prematurely.
• If the saw chain becomes soiled with
resin, for instance, clean it with
kerosene and soak in it oil.
To sharpen other chains, follow chain manufacturer’s instructions.
Depth gauge tool
55°
Side plate angle
30°
Top plate filing angle
0.64 mm (0.025 in.)
Parallel
Depth gauge