Instructions / Assembly

DESCRIPTION CS-400

20 X7503255900

Guide Bar and Saw Chain Installation/Removal

Note: Align the brake connector (B) of the sprocket

guard to the groove on the side of the brake

lever (Front hand guard).

1. Remove air cleaner cover and disconnect spark plug

lead.

2. Move the chain brake lever (A) (Front

hand guard) fully REARWARD

(UNLOCK chain brake) to remove or

install the sprocket guard (C).

3. Remove sprocket guard nuts (D) and

remove sprocket guard (C).

4. Remove guide bar and saw chain if

necessary.

Note: See “Maintenance and Care”

section for guide bar/saw

chain maintenance

procedures.

5. Mount guide bar on studs (E) and

slide toward sprocket (F) to make

saw chain installation easier. Install

saw chain around sprocket and

guide bar as shown, with cutters on

top of guide bar facing forward.