Instructions / Assembly

EMISSION CONTROL CS-400

16 X7503255900

The enclosed message provides information necessary for the

protection of the unit.

Note: This enclosed message provides tips for use, care and

maintenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited. Ignoring

these prohibitions can result in serious or fatal injury.

EMISSION CONTROL (EXHAUST &

EVAPORATIVE)

CARB And EPA Emissions Control Information

The emission control system for the

engine is EM (engine modification) and,

if the second to last character of the

Engine Family on the Emission Control

Information label (sample below) is “B”,

“C”, “K”, or “T”, the emission control

system is EM and TWC (3-way catalyst).

The fuel tank/fuel line emission control

system is EVAP (evaporative emissions). Evaporative emissions for California

models are only applicable to fuel tanks.

An Emission Control Label is located on

the engine. (This is an EXAMPLE ONLY,

information on label varies by engine

FAMILY).

Product Emission Durability

(Emission Compliance Period)

The 50 or 300 hour emission compliance period is the time span selected by the

manufacturer certifying the engine emissions output meets applicable

emissions regulations, provided that approved maintenance procedures are

followed as listed in the Maintenance Section of this manual.