Manual

21
CS-370
CHAIN AND GUIDE BAR COMBINATION
The following combinations are recommended for model CS-370.
@ Standard configuration
Guide Bar Saw Chain
Length ECHO Part No. Pitch Type Links
mm (in.) Double Guard mm (in.) (OREGON)
356 (14) 14A0CD3752 9.53 (3/8) 91P, 91VG 52
@ 406 (16) 16A0CD3757 9.53 (3/8) 91P, 91VG 57
457 (18) 18A0CD3762 9.53 (3/8) 91P, 91VG 62
GUIDE BAR
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to
have equivalent kickback energy.
• Sprocket nose guide bars of the same length
and nose radius, same pitch and having the
same number of teeth.
• Hard nose guide bars of the same length and
nose radius as a sprocket nose bar.
SAW CHAIN
(Low-kickback)
CAUTION
Do not use replacement saw chain unless it
has been designated as meeting the ANSI
B175.1 - 2000 kickback performance
requirements, when tested on the
representative sample of chain saws below
3.8 c.i.d. specified in ANSI B175.1 - 2000.
NOTE
LOW KICKBACK SAW CHAIN meets the
kickback performance requirements of ANSI
B175.1-2000 (safety requirements for gasoline-
powered chain saws).