Use and Care Manual

5
CS-352
SYMBOL FORM
TO AVOID KICKBACK
1. Hold the chain saw rmly with both
hands.
2. Don’t let the nose of the guide bar
contact any obstruction.
3. Tip contact may suddenly move the
guide bar upward and backward,
which may cause serious injury.
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Wear eye, ear, and head
protection
Carburetor adjustment
- Low speed mixture
Oil and gasoline mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Chain brake operation
Chain oil ll
DECALS
Locate these safety decals on your unit. The complete unit illustration found
in the “NOMENCLATURE OF PARTS” section will help you locate them.
Make sure the decal is legible and that you understand and follow the
instructions on it. If a decal cannot be read, a new one can be ordered from
your ECHO dealer.
Emergency stop
Choke control “Cold Start”
position (choke closed)
STOP
WARNING!! Read and follow all
safety precaution in the instruction
manual. Failure to follow
instructions could result in serious
personal injury.
CS-352
REPLACEMENT BAR AND CHAIN
GUIDE BAR* CHAIN*
PART NO. PART NO.
12” 12A0CD3745 91VG45CQ / 91P45CQ
14” 14A0CD3752 91VG52CQ / 91P52CQ
16” 16A0CD3757 91VG57CQ / 91P57CQ
Note: There may be other replace-
ment components for achieving
kickback protection. For details,
please refer to the chain and bar
combination sheet shown in the
instruction manual.
WARNING!!
Read and follow all safety
precaution in the instruction
manual