Operator's Manual

CS-3510 OPERATION
X7503360201 33
© 8/20 ECHO Incorporated
1. Move chain brake lever fully
FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain
oil in the tanks.
3. Securely hold the chain saw as
shown and pull starter handle.
4. Choke (A) may be used if
necessary, but after first starting
sound, squeeze throttle trigger to
release choke to OPEN and
return engine to idle.
Note: If engine does not start
after 5 pulls, use cold start
procedure.
Note: Do not increase engine
speed while chain brake is locked. Severe brake damage will
result.
Running
The saw chain should not move at idle, otherwise serious
personal injury may result.
Note: If saw chain moves adjust carburetor according to
“Carburetor Adjustment” instructions in this manual, or see
your dealer.
Chain Brake Locked
A