Operator's Manual
Table Of Contents
- Operator’s Manual CS-3510 CHAIN SAW
- Table of Contents
 - Introduction
 - Servicing Information
 - Packing List
 - Safety
 - Emission Control
 - (Exhaust & Evaporative)
 - Description
 - Operation
 - Maintenance
 - Troubleshooting
 - Storage
 - Specifications
 - Notes
 - Product Registration
 
 
CS-3510 OPERATION
X7503360201 31
© 8/20 ECHO Incorporated
Winter Operation
Air cleaner cover - Use the winter 
plug (A) to prevent carburetor trouble 
in winter.
• Remove air cleaner cover. Remove 
winter plug (A) from warm weather 
position (B), and install into cold 
weather position (C).
Note:  For operation at normal 
temperature (5°C [41°F]) 
return the plug to its 
original position. To 
prevent over heating of the 
engine.
Starting Cold Engine
Make sure the bar and chain are free from any obstruction when 
starting the chain saw. 
1. Move chain brake lever fully 
FORWARD to LOCK chain brake 
before starting.
2. Fill the fuel tank with fuel mixture. 
Do not over fill.
3. Fill the chain oil tank with 
lubricant. Do not over fill.
4. Push purge pump (A) 3 to 5 
times or until fuel is visible in 
purge pump.
5. Pull choke control knob (B) all the 
way OUT (CLOSED [ ] choke 
position).
A
B
C
Chain Brake Locked
A
B










