Owner's Manual

34 X7503270007

MAINTENANCE CS-310

Setting The Saw Chain

Important points for proper maintenance of saw chain:

• Keep the cutters sharp at all times.

• Keep the left and the right cutters properly aligned.

• Note that blunt or irregular cutters will result in poor cutting

performance, increased vibration of chains and premature

breakage of the saw chain.

• Drive link serves to remove sawdust from the groove of the

guide bar. Keep the lower edge of the drive link sharp where

indicated.

Setting Saw Chain

• For setting saw chain, round file (4.0 mm dia. 5/32 in.) and flat

file are used.

• Push file as shown.

• To keep correct position and correct angle, use a file holder.

• Hold the file horizontally.

Right hand cutter

Left hand cutter

Preset tie strap

Top plate

Side plate

Depth gauge

Drive link

Tie strap

Guard link

For more information

scan this QR code.

Sharpen lower edge

30°

Keep this angle

90°