Use and Care Manual

Running

WARNING

The saw chain should not move at idle, otherwise serious per-

sonal injury may result.

NOTE

If saw chain moves adjust carburetor according to “Carburetor

Adjustment” instructions in this manual, or see your dealer.

• After engine starts, allow it to return to idle.

• Move chain brake lever fully rearward to unlock chain brake.

• Press throttle control lockout then gradually squeeze throttle

trigger to increase engine speed.

• Saw chain starts moving when the engine reaches approxi-

mately 4,400 rpm.

• Ensure proper acceleration and lubrication of chain and bar.

• Do not run the engine at high speed unnecessarily.

• Be sure that saw chain stops moving when throttle trigger is

released.

stopping

1. Release throttle trigger and turn switch (A) to STOP (O) posi-

tion.

2. Move chain brake lever fully forward to lock chain brake.

NOTE

If engine does not stop, pull choke out fully to stop engine.

Return the unit to your authorized ECHO dealer to check and

repair stop switch before starting the engine again.