User guide

SERVICE INFORMATION
CS-2600ES
CS-2700ES
4
1-3 Torque limits
Descriptions Size kgf•cm N•m in•lbf
Starter Starter pawl M5* 40 - 60 4 - 6 35 - 50
system
Starter case M4** 10 - 20 1 - 2 9 - 18
Ignition Magneto rotor (Flywheel) M8 160 - 200 16 - 20 140 - 175
system
Ignition coil M5* 30 - 45 3.0 - 4.5 26 - 40
Spark plug M14 130 - 170 13 - 17 115 - 150
Fuel Carburettor M5 30 - 45 3.0 - 4.5 26 - 40
system
Intake bellows M5 35 - 50 3.5 - 5.0 30 - 44
Clutch Clutch hub LM10 230 - 260 23 - 26 200 - 230
Engine Crankcase M5*
†
55 - 95 5.5 - 9.5 48 - 83
Engine mount M5 70 - 110 7 - 11 60 - 95
Dust cover (Only CS-2600) M4** 10 - 20 1 - 2 9 - 18
Muffler M5 70 - 100 7 - 10 60 - 90
Muffler cover M4** 10 - 20 1 - 2 9 - 18
Others Auto-oiler M4 15 - 25 1.5 - 2.5 13 - 22
Front handle M5** 20 - 40 2 - 4 18 - 35
(CS-2600ES) M4** 10 - 20 1 - 2 9 - 18
(CS-2700ES) M4** 8 - 12 0.8 - 1.2 7 - 10
Top handle (CS-2600ES) M4** 10 - 20 1 - 2 9 - 18
Rear handle (CS-2700ES) M4** 10 - 20 1 - 2 9 - 18
Top handle assembly
M4** 20-30 2-3 18-26
(CS-2600ES)
Rear handle assembly
M4** 20-30 2-3 18-26
(CS-2700ES)
Brake lever (Hand guard) M5 25 - 45 2.5 - 4.5 22 - 40
Chain catcher M5** 20 - 40 2 - 4 18 - 35
Guide bar stud M8 180 - 250 18 - 25 130 - 220
Guide bar M8 200 - 230 20 - 23 175 - 200
Regular bolt, nut and screw M3 6 - 10 0.6 - 1.0 5 - 9
M4 15 - 25 1.5 - 2.5 13 - 22
M5 25 - 45 2.5 - 4.5 22 - 40
M6 45 - 75 4.5 - 7.5 40 - 65
LM: Left-hand thread *Apply thread locking sealant (See next page) ** Tapping screw
†
The torque differences among four bolts should not exceed 20 kgf•cm (2Nm, 17in•lbf) on one cylinder or
crankcase.