Use and Care Manual

BRD-2620 MAINTENANCE

X7502343000 37

ENGLISH

Blade Replacement/Lubrication

Level 1.

Note: Grease gear case every 15-25 hours of use. Replace blade

when carbide tips have worn away.

1. Shut engine off. Disconnect spark plug lead from spark plug.

2. Remove split pin (A).

3. Rotate blade until holes in inner

blade adapter (B) and gear box

align. Insert locking tool to lock

PTO shaft (C).

Note: Blade nut (D) is left hand

thread.

4. Remove blade left hand

threaded nut (D) in a clockwise

direction using T-wrench.

Remove outer fixing plate (E),

blade (F) and inner fixing plate

(B).

5. Clean all loose debris from gear box.

6. Remove plug (G) and check

level of grease. Grease should

fill gear case to bottom of

grease plug hole.

7. Add grease if necessary using

squeeze-type tube. Do not use

high pressure grease gun. DO

NOT over-fill.

Parts Required: Blade, new split pin, lithium Based Grease