Use and Care Manual

MAINTENANCE BRD-2620

30 X7502343000

2. Remove air filter cover. Brush dirt from inside cover.

Assure throttle wire retaining clip

(A) remains in place as shown

when removing or installing air

filter cover.

3. Remove foam pre-filter (B) and

air filter and clean as indicated

below:

4. Foam Pre-filter.

5. Clean foam filter in water/deter-

gent solution and rinse with

clean water.

• Wrap the filter in a clean, dry

cloth and squeeze (do not

wring) dry. Allow to dry com-

pletely before reuse. Do not

oil.

Air Filter

• Lightly brush debris from filter. Replace filter if it is damaged, fuel

soaked, very dirty, or the rubber sealing edges are deformed.

6. Assemble components in reverse order.

Assure air filter is assembled

with pleats oriented vertically.