Use and Care Manual

BRD-2620 MAINTENANCE
X7502343000 29
© 8/2017 ECHO Inc.
ENGLISH
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and
your experience will determine the frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
(1) Apply lithium based grease every 25 hours of use.
(2) Low evaporative fuel tanks DO NOT require regular maintenance to
maintain emission integrity.
* Replacement is recommended based on the finding of damage or wear
during inspection
Air Filter
Level 1
1. Close choke (COLD START [ ] position). This prevents dirt from
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
Every Refuel
Fuel System
Inspect (2) 1
Blade Inspect 1
3 Months
Air Filter
Replace * 1
Fuel Filter
Inspect * 1
Fuel Cap Gasket
Inspect * 1
Spark Plug
Inspect/Clean/Replace * 1
Muffler Spark Arrestor
Inspect/Clean/Replace * 2
Cylinder Exhaust Port
Inspect/Clean/Decarbon 2
Drive Shaft (Flex Cable Models)
Grease (1) 2
Gear Housing Grease (1) 2
Blade Inspect*
Yearly
Fuel Filter
Inspect/Replace * 1
Fuel Cap Gasket
Replace * 1
Parts Required: Tune Up Kit.
COMPONENT/SYSTEM
MAINTENANCE
PROCEDURE
REQ’D
SKILL
LEVEL