Use and Care Manual

OPERATION BRD-2620
26 X7502343000
© 8/2017 ECHO Inc.
Be sure blade has completely stopped spinning before setting unit on
concrete or other hard surface. Never allow spinning blade to contact
hard surfaces. Carbide teeth on blade can break, or damage to
surface can occur.
The complete unit, specifically the drive shaft
assembly and muffler exhaust area may be-
come very hot during use. Avoid contact
during and immediately after operation, otherwise serious per-
sonal injury may result.
Edging Operation
Before edging, be sure to read and understand the entire
Operator’s Manual and Safety Manual to avoid the chance of
serious personal injury.
1. Before edging, water the area to soften the ground to make edging
easier.
2. Before edging, check the area and remove all obstacles and objects
that could be thrown.
3. Plan to edge regularly to make it easier to keep a neat edge and to
avoid having to make more than one pass.
Never adjust blade height or clear debris from shield with
engine running, otherwise serious personal injury may result.
Note: Blade depth may have to be adjusted due to differences in
height between the hard surface and the top of the grass.