Use and Care Manual

BRD-2620 OPERATION

X7502343000 25

ENGLISH

5. When starting to work, run the

engine at full throttle, and lower

the blade gently into the

ground. Travel around

perimeter of bed, allowing the

Redefiner to improve bed's

edge.

6. Do not force the blade. Move

only as quickly as conditions

will allow. If performance suffers

or engine RPM drops, reduce

walking speed or decrease

blade depth and allow engine

RPM to return to normal before

continuing.

Note: Blade height may need to be adjusted due to differences in

height between the bed and the top of the grass.

Never adjust blade height while engine is running, otherwise

serious personal injury may result.

7. Loosen adjustment knob (A)

and adjust the blade’s depth of

cut. Tighten adjustment knob

(A) when desired blade height

is achieved.

8. If shield clogs with mud or

debris, do not hit unit against

hard surfaces to clean, or

damage to unit may occur. Stop

engine and unclog shield with a

suitable tool.

Increase

Depth

Decrease

Depth