Use and Care Manual

BRD-2620 ASSEMBLY
X7502343000 17
© 8/2017 ECHO Inc.
ENGLISH
ASSEMBLY
Support Handle
1. If necessary, position support
handle for comfortable
operation and securely tighten
screws.
Note: Label shows minimum
spacing for support
handle location.
Edger Blade Installation
1. Remove bed redefining blade
as shown in “Blade
Replacement” Section. Discard
used split pin.
2. Do not remove inner blade
adapter (A) or locking tool (B)
(not provided).
3. Install and center edger blade
(C) on inner adapter.
4. Install outer adapter (D) and nut
(E).
5. Tighten nut (E) firmly,
counterclockwise.
6. Remove locking tool (B).
7. Install new split pin (F) to
secure nut (E).
A
B
C
D
E
B
F