SDS

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational exposure controls:
Component
Exposure Limits
Basis
Entity
9. PHYSICAL AND CHEMICAL PROPERTIES
Conditions for Safe Storage, Including Any Incompatibilities
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances stated in section 10.
Store protected from moisture.
Propylene glyco1
None
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to
keep airborne concentrations low.
Eyes
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA
Respirators
Respiratory protection program that meets OSHA’s 29 CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace conditions warrant a respirator’s use.
Skin
Wear appropriate protective gloves to prevent skin exposure.
Other
Other Recommendations
None
Physical
State liquid
Colour
Pinky
Odor
Odorless
PH
7.5-11
Vapor Pressure
93.54kpa (20°C)
Vapor Density
Evaporation Rate
0.993
Viscosity
7.0 mm2/s (20°C), 1.35 mm2/s (80°C)
Flash Point
153.5°C
Boiling Point
106°C
Freezing
-35°C
Solubility
Water soluble
Specific Gravity
1.115 g/cm3
Flammable Limits
Combustion Heat
Ignition Temp
159.5°C
Lower/Upper Explosion Limits
2.5 vol %, 12.6 vol %