Owners Manual v.3 User guide

4 INCH CHIPPER
17
ENGLISH
SERVICE & MAINTENANCE
WARNING
BEFORE INSPECTING OR SERVICING ANY PART OF THIS MACHINE, SHUT OFF POWER SOURCE AND MAKE SURE
ALL MOVING PARTS HAVE COME TO A COMPLETE STOP.
Figure 5.6, Belt tension
5.7 REPLACING ROTOR BEARINGS
5.7.1 REPLACING ENGINE MODEL BEARINGS
1. Remove

rotor access.
2. Remove large belt guard.
3. 
slide engine to loosen belt tension. Then remove drive


4. 

5. 


6. 

7. Replace roll pin.
8. 

9. 




10. 
       



11. Replace belt guard and resume operation.
12. 

5.7.2 REPLACING PTO MODEL BEARINGS
1. Remove

rotor access.
2. Remove large belt guard.
3. 


4. 

5. 


6. 

7. Replace roll pin.
8. 

9. 


         

10.         
        


11. Replace belt guard and resume operation.
12. 
      
 

4. 
5. 

6.         


7. Reinstall belt guard.
8. 


5.8 CLEARING A PLUGGED ROTOR
         
come to a complete stop.
2. Remove the retaining bolt holding the access cover to



4. Close rotor access cover and replace bolt.
5. Start engine and engage drive belt to resume
operation.
SPAN LENGTH
FORCE
20 LBS
7/16" DEFLECTION