Owners Manual v.3 User guide

4 INCH CHIPPER12
1. 
2. 

3. Move the choke lever to the ON position. When
        
           

choke.
4. Depress belt engagement pedal.
5. 

more than 10 seconds.
6. 
7. 
let belt engagement pedal up. This will engage the
chipping disc.
8. 
choke or increase engine RPM.
WARNING


4.3 STARTING ENGINE MODEL
IMPORTANT
This chipper is designed to be used with a tractor


machine damage in overload conditions
WARNING
       
      

1. Move throttle to slowest position.
2. Depress belt engagement pedal.
3. Turn engine switch to OFF position.
4. 
the rotor.
5. Allow machine to come to a complete stop.
4.4 STOPPING ENGINE MODEL
Section
OPERATION
4
IMPORTANT

-
ond cold down period between starting attempts. Fail-

motor. Do not jump start engine.
4.1 STARTING PTO MODEL
4.2 STOPPING PTO MODEL
1. Move tractor throttle to slowest position.
2. 
3. Allow machine to come to a complete stop.
1. Connect PTO driveline to tractor as described in Sec.
2.10.
2. 
3. 

RPM.


        

CHIPPING OPERATION
         
      

chipper chute is sliced into small chips and propelled out
through a discharge tube.
WARNING




