Owners Manual v.3 User guide
4 INCH CHIPPER
9
ENGLISH  
ASSEMBLY
2.10.1 CHECK LENGTH OF PTO DRIVELINE
1.  Attach chipper to tractor with three-point hitch. 
2.  You must make sure that the PTO driveline supplied 
the shortest and longest distance between the chipper 
3.  The PTO driveline has a maximum extension 
a longer PTO driveline.
4.  The PTO driveline has a minimum compression
2.10.2 SHORTENING A PTO DRIVELINE
1.  Pull the driveline into two pieces. Connect one end to 
the tractor PTO and the other end to the chipper rotor 
2.  
3.  Cut the shield tube in the marked position.
4.  
5.  
2.10 CONNECT PTO DRIVELINE
Figure 2.6 Shorten the driveline if it is too long
IMPORTANT
6.           
together.
2.10.3 CONNECTING THE PTO DRIVELINE
1.          
       
2.           
tractor.
•  The tractor must have a standard 540 RPM PTO 
shaft.
•         










