Instruction Manual

6 INCH CHIPPER
17
SERVICE & MAINTENANCE

AND MAKE SURE ALL MOVING PARTS HAVE COME TO A COMPLETE STOP.
WARNING
FEED
ROLLER
JACK
CHECK
VALVE
SUPPORT
BRACKET
LOCK PIN
STORAGE
POSITION
LOCK PIN
POSITION


        1.
switch. Allow all moving parts to come to a complete
stop.
2.

 3.

4.
5.

6.
support bracket and lock pin position.
7.

to avoid the chipper blades when cleaning out the
debris.
Remove the lock pin and put it back in storage 8.
position. LEAVING THE LOCK PIN IN ANY OTHER
POSITION MAY INTERFERE WITH FEED ROLLER
OPERATION.
Turn the check valve counterclockwise to disengage 9.

Close access cover and replace bolts.10.
Start the engine. Depress belt engagement pedal 11.
when engine is running to engage drive belt. Resume
operation at 1/4 throttle.
5.12 CLEARING A PLUGGED ROTOR
Figure 5.5, Feed roller jack