Instruction Manual
6 INCH CHIPPER
7
ASSEMBLY
2.4 ATTACH DISCHARGE TUBE
Attach the blower discharge tube to the chipper 1.
bolts to secure it.
2.
it in place with the lock pin to make sure it is mounted
DISCHARGE
CAP
3/8” x 1” BOLT
3/8” x 2” BOLT
KNOB, 3/8”
INSERT
3/8” x 1-1/4”
BOLT
SPACER
DISCHARGE CLAMP
3/8” NUT
Figure 2.5, Attaching the discharge tube
MOUNTING
FLANGE
Figure 2.4, Mount the discharge to the mounting ange
2.6 ADD FLUIDS
2.6.2 GASOLINE
2.6.1 MOTOR OIL
1.
three minutes.
2.
3.
gasoline.
WARNING
damage:
DO NOT MIX OIL WITH FUEL.
2.6.3 HYDRAULIC FLUID
These include premium turbine oils, API CD engine oils
per SAE J183, M2C33F or G automatic transmission
2.5 INSTALL A BATTERY
Nominal Voltage:12 Volts










