User Manual

Echo 2 User Guide
8
Touch Panel
The touch panel controls the Echo 2's built-in mixer.
The panel uses capacitive touch technology to sense the touch of a finger. A light touch
is all that is needed: the panel can’t differentiate between a light or hard press. The
active area for each touch control is in the center of the rounded gray rectangle to the
right of the LED indicator. For the slider, the active area is directly beneath the
horizontal gray lines.
To avoid accidental activation, each control must be touched for approximately half a
second before the touch will be recognized. Some functions, such as EZ trim, are
activated by a “long” touch of approximately two seconds.
The front panel is scratch resistant, but can be scratched by hard or sharp objects.
Care should be taken to protect it. Clean only with a soft, damp cloth.