User Manual

Echo 2 User Guide
19
Specifications
Analog Inputs
• Two ¼" TS/TRS inputs with selectable microphone, balanced line, or high-
impedance instrument.
• Switchable +48 V phantom power
• EZ Trim - Precisely set your inputs to the optimal level with the touch of a button
• Low noise (-129 dBu EIN) studio grade mic preamps, up to 75 dB of gain
• Input impedance - Mic: 1.8K ohms, Line: 20K ohms, Instrument: 1 Meg
• Two female XLR to male 1/4" TRS cables included
• Frequency Response: 10 Hz – 20 kHz, +/- 0.1 dB
• Dynamic Range: 115 dB A-weighted
• THD+N: .001% A-weighted
Analog Output
• Two ¼" TS/TRS outputs
• Frequency Response: 10 Hz – 20 kHz, +/- 0.1 dB
• Dynamic Range: 113 dB A-weighted
• THD+N: .0015% A-weighted
• Line output impedance: 120 Ohm
• One ⅛" headphone output with adjustable volume and monitor levels and main
mute
• Max output level headphones: 10 dBu
• Max output current headphones: 60 mA
• Headphone output impedance: 1 Ohm
• Supports full duplex 2 channels in, 4 channels out operation at 24 bit,
up to 192 kHz sample rate
• Near zero latency hardware monitoring
Converters
• 128x oversampling converters
• Low jitter with less than 4 ps internal clock
• 24 bit data resolution maintained throughout signal path
• Multiple standard sampling rates supported: 44.1k, 48k, 88.2k, 96k, 192k
Dimensions
• 5.4” x 3.6” x 1” (137mm x 92mm x 26mm) – 0.5 lbs.