User Manual

Echo 2 User Guide
16
Windows
To use the Echo 2 with a Windows computer, you'll need Windows XP, Windows Vista,
and Windows 7. Both 32-bit and 64-bit versions of Windows Vista and Windows 7 are
supported.
You will also need an available USB 2.0 or 3.0 port; USB 1.0 or 1.1 ports will not work.
First, you will need to install the Echo 2 driver. Drivers are available on our website:
http://www.echoaudio.com/echo2
Leave the Echo 2 disconnected from your computer, and download the driver.
Once you've downloaded the driver, run the setup program:
The installer will prompt you to connect the Echo 2 to your computer. Go ahead and do
that, making sure you're using a high-speed USB 2.0 cable. Click OK; the installer will
detect the Echo 2 and complete the installation process. This can take several minutes,
depending on whether or not the Echo 2 has been installed before.
Once the installation is complete, the Echo 2 will be available as an audio device in the
Windows Sound control panel.