User Manual

Connecting to the Audio Interface
17
Connecting to the Audio Interface
The new AudioFire 8 (as of July 2009) now has optical S/PDIF and ADAT I/O, in
addition to coaxial S/PDIF.
Analog Inputs and Outputs – AudioFire Pre8
AudioFire Pre8’s front panel has two universal inputs (1 – 2) with meters and trim
knobs. Inputs 1 – 2 also have Phase, 80Hz, Pad, LoZ, DI and phantom power
buttons with corresponding LEDS. In addition, there are six meters and trim knobs
on the front panel for universal inputs (3-8) and a corresponding phantom power
button and LED. There are also two ¼” stereo headphone output jacks wired in
parallel which monitor analog outputs 1 and 2 with a corresponding volume knobs,
the main volume control (Outputs 1 – 2) and the On/Off button and LED.