Owner`s manual

Remember that all of the monitor controls remain in effect even when

they’re not displayed. The degree of attenuation (or muting) of each level is

set by the monitor controls. The Console program constantly maintains a

level setting for each of the monitor paths it controls. Clicking on an output

pair selection button simply selects the settings that are displayed.

Setting Clock Sources and Destinations

At the top of the Console there is a drop down menu labeled

In Clock

that

allows you to select the synchronization clocks that are used by Mona. The

console program will detect which input clocking options are available, and

automatically disable those that are unavailable. Depending on what

external devices you have connected to Mona, you may have as many as

three out of four options available.

If you are unsure which clock synchronization selections are appropriate for

your installation, be sure to read the next section, which deals with the types

of clocks that Mona supports.

Synchronizing Multiple Devices

Mona is designed to work alongside other audio equipment. If you are

planning on using Mona with other audio equipment, please note the

following:

The Mona Macintosh drivers included in this package support multiple

Monas within the same system. In addition, your new Mona will operate

alongside Layla24, Layla, Gina24, Gina, Darla and Darla24. Mona can also

peacefully coexist with audio equipment from other manufacturers, but be