Owner`s manual

22
Input Levels
The
Input Levels
are located in the upper portion of the Console surface.
Here you will find level meters for all of Mona’s analog and digital inputs.
Since Mona has analog input trims on it’s rack-mount interface box, there
are no other controls in this area of the Console.
Monitor Channels
Below the
Input Levels
are the
Monitor Channel
controls. The
Monitor
Channel
controls allow you to monitor the input signals via any of the
available outputs on your Mona. Each input channel has a corresponding
monitor channel directly below it on the Console. At the top of each monitor
channel is a button that allows you to selectively
Mute
each channel.
Directly below that is a pan control that will pan between the two channels
in the designated stereo output pair. In the middle you will find a fader that
determines how much of the input signal is sent to the designated stereo
output pair. Below the fader is a display that shows the currently selected
level of attenuation. In addition to using the fader, you can change this level
by clicking in the display, typing, and then pressing
return
on your
keyboard. There is also a group of numbered buttons on the bottom left.
These buttons allow you to select which set of monitor controls will be
displayed.