Owner`s manual

ADAT / S/PDIF Optical I/O

Next to the

COMPUTER

connector is a pair of connectors labeled

OPTICAL,

and

OUT

. These connectors are used to transmit digital

data among digital audio devices via an optical signal.

You can use this port for ADAT (8 channels) or for optical S/PDIF (stereo)

I/O. NOTE: Mona is only capable of transmitting or receiving one type of

digital signal at a time. You must choose either ADAT optical or S/PDIF

(optical or RCA); you cannot use both simultaneously. The

Digital Mode

Switch

can be found in the Mona Echo Console. For more information, see

the appropriate section in this manual under the heading “

The Echo

Console

.”

S/PDIF

Next to the

ADAT

connectors is a pair of connectors labeled

S/PDIF

and

OUT

. These S/PDIF connectors are used to transmit digital data among

digital audio devices via an electrical signal. S/PDIF data can use the full

24-bit sample width used internally on Mona.