Owner`s manual

15
Each of Mona’s six outputs has one RCA and one XLR connector for your
convenience. The RCA jack outputs a –10dBV (unbalanced) signal, while
the XLR jack outputs a +4dBu (balanced) signal. Both connectors are active
at all times. So the output signal will always go out of both jacks.
The Computer Connector
Next to the analog inputs and outputs is a connector labeled
COMPUTER
.
This connector is known as a DB-9, and is similar to the serial port on a PC.
It is the point at which the audio interface connects to the Mona PCI card
inside your computer.
A cable was supplied with your Mona for this purpose. This custom made
cable is manufactured to certain specifications and, if necessary, should only
be replaced by a special Mona cable available only from Echo.