Owner`s manual

7
“
Font Size
.” If this is set to
Large Font
and your screen resolution is less
than 1024x768 you will either need to change it to
Small Font
or increase
your screen resolution.
System Sounds
There is one final step to perform before installing the Mia hardware. We
suggest that you turn off your Windows system sounds prior to installing
Mia. Because most system sounds are sampled at very low sample rates,
typically 8 to 11 KHz, each time they are played it will cause the sample
rate clock on Mia to reset to the slower speed. This can cause digital
equipment sync’d to Mia to lose synchronization.
To turn off the system sounds, first go to the Windows
Control Panel
,
which can be found under
Settings
from the
Start
button. On the control
panel you will find an icon titled “
Sounds
”. After double clicking on this
icon, you will see a window labeled “
Schemes
” near the bottom of the
screen. Click on the small down arrow to the right of the combo-box and
select the “
No Sounds
” option. Then click on the Ok button.