Owner`s manual

6
System Requirements*
• Genuine Intel Pentium II/III or AMD Athlon/Duron system running
Windows 98/Me/NT/2000
• Genuine Intel chipset of VIA KX-133, VIA KT-133, or AMD 760
chipset (Athlon/Duron)
• 64Mb RAM (more highly recommended)
• A fast, high-capacity IDE or SCSI hard disk drive
• Peripheral audio equipment, such as microphones, studio monitors,
musical instruments, mixer, etc.
* Win NT/2000 drivers are expected to be ready in early 2001.
Check www.echoaudio.com
for availability.
Mia Installation
Complete Mia installation consists of performing a system check, disabling
Windows system sounds, installing the Mia PCI card, installing the Mia
Windows drivers into your system and, if necessary, installing a multi-track
audio recording/editing application.
System Check
The first thing you should do is check the display settings for your
computer. The Mia Echo Console software requires small fonts to display
properly, or if large fonts are selected then a minimum resolution of
1024x768 is needed.
To check your display settings, go to the Windows
Control Panel
, which
can be found under
Settings
from the
Start
button. In the
Control Panel
window you will find an icon titled “
Display
.” After double clicking on
this icon, the
Display Properties
window will appear. Click the
Settings
tab at the top right of this window. At the bottom right of the window you
will see a box labeled
Desktop area
or
Screen area
. Inside the box is a
slider that allows you to select different resolutions for your monitor. Note
your current screen resolution and then click the
Advanced
button on the
bottom right of the window. You should see a drop down window labeled