Owner`s manual

54
If you want to use both Gigasampler and Reality, you'd better have a really
good computer. If you do, just make sure you start both of them before
VST.
Retro AS/1 and Cubase VST
Unfortunately, we haven't been able to get Retro AS/1 to work with Cubase
at the same time. This is mainly because we couldn't find a way to tell
Retro AS/1 to use any outputs other than 1 and 2. Even if you start Retro
first, both Retro and Cubase end up fighting over outputs 1 and 2 and
nobody's happy.
We'll keep looking into this. You could easily use them both if you had two
sound cards (either two of our cards or one of our cards & one from
someone else).
Gigasampler
Q: I'm a Gigasampler user. Anything I should know about?
Yes. We recommend that you always use the latest version of Gigasampler
or Gigastudio. You can download any available upgrades from their website
at www.nemesysmusic.com
Q: Once I get the update, is there anything else I should know about?
Yes. Gigasampler will not work if you have
DirectSound
enabled. You
will need to go into the
DirectSound/GSIF
property page and enable
GSIF
.
If you have more than one of our cards, you need to enable
GSIF
separately
for each card.